Bushing & Locking Screws for MTI's Split Test Cell for Lithium Air Battery Research STC-AIR-BLS Al2O3 Sample Plate

Bushing & Locking Screws for MTI's Split Test Cell for Lithium Air Battery Research STC-AIR-BLS Al2O3 Sample PlateSTC AIR BLS is one set of bushing and locking Screws for MTI's Split Test Cell for Lithium Air Battery Research EQ STC LI AIR SPECIFICATIONS Modle STC AIR BLS for EQ STC LI AIR and STC ZINCAIR W Dimensions Material Bushing: PTFE Locking Screws: Stainless Steel Qty in package 4 set of bushing and locking screws Split Test Cell

7Mpa is recommended)

Surface finish (RMS or Ra) : < 25A

Click the picture below to see the finished                     Click the video below to see how to

Temperature Resistance: 300 oC

Power input connector: 4-pin aviation connector

100 mL capacity for about 50g of material

YSZ Milling Ball: Same Diameter

Nickel foam was carefully cleaned by concentrated HCl solution (37 wt

LSAT  Bi-Crystal substrate is made of two pieces oriented LSAT crystal

Non- effactive area: 2

05) mm thick

94mm  Flatness = 0