Gamewell FCI PID-95 NEXT

Gamewell FCI PID-95 NEXTThe Point Identification Device connects to the Signaling Line Circuit (SLC) via two wires. The PID 95 will monitor, via a two wire supervised SLC circuit, contact type devices such as a water flow switch or a manual station. Upon activation of the monitored device, the PID 95 will report its address to the 600 Series or ILI95 E3 Series FACP via the analog SLC. The fire alarm control panel will then activate into all alarm programmed outputs related

NC750J Vultus 2017 (Engine Filter)

We call this technology 4D

Intelligent device with microprocessor

the GSA-CR/MCR relay activates the normally open or normally-closed contact

Simple switch selection provides a wide variety of operational configurations

The ECC-50BDA supports the use of low frequency sounders per UL 464

the SD365(A) Series point ID capability allows each detector’s address to be set with rotary

Tiger 1200 GT 2022-2023

The GSA-IM module requires one detector address on the SLC

Tiger 850 Sport 2021-2024

CBR1000RR Repsol 2004-2015

FREE FREIGHT SHIPPING