Z33 350z/Z34 370z /V35/V36 stand alone SS braided hydraulic handbrake line kit #M145-TROD

Z33 350z/Z34 370z /V35/V36 stand alone SS braided hydraulic handbrake line kit #M145-TRODThe GKTECH Z33 Z34 V35 V36 stand alone SS braided hydraulic handbrake line kit is designed to be used with OEM Z33 Z34 V35 V36 Brembo or non Brembo 2pot calipers including Akebono, when setting up our standalone dual caliper hydraulic handbrake kit. These lines go all the way from any selected master cylinder with a 3 8 24 thread to the rear calipers. As seen in our V2 handbrake assembly, as seen here: https: au. gktech. com v2 hydraulic handbrake

TheGktech S13 Silvia/180sx handbrake cables are a direct replacement of the OEM handbrake cables for the Nissan S13 Silvia and 180sx

now under both extension and compression the car will toe in to increase forward bite and grip both on and off throttle

not only opening up a world of brake options but allowing the use of superior 5 stud wheels

The GKTECH diff brace provides additional support to the diff in your Z34 370z resulting in reduced wheel hop under hard driving conditions

- Designed to be used with 6x70mm PCD with one bolt at the top & 6x74mm PCD with two bolts at the top

1122065F06 or Nismo part numbers 11210-RS540 and 11220-RS540

If you are running our dual caliper kit

52mm) and the studs used on our brackets are 10mm and as such the 2 mounting holes needs to be drilled out on the calipers to 10mm

370z/G37 Rear camber arms

The DPS uses heavy wall stainless steel pistons to resist corrosion and slow the heat transfer from the pads

Pre-painted ready to bolt in

We also include extended handbrake studs